Skip to main content

GDSN in practice: how suppliers publish product data to retailers

How GDSN works for a supplier: data pool sign-up, the GTIN hierarchy and GPC brick, CIN and CIC messages, feedback statuses and GS1 Data Source in NL and BE.

Diego Nijboer

GDSN in practice: how suppliers publish product data to retailers

In practice, GDSN works like this for a supplier: you load your item data into one GS1-certified data pool, the pool registers a few basic facts about each item in the GS1 Global Registry, your customers subscribe through their own data pool, you publish the items to them, and their side sends back a confirmation message (a CIC) that says whether the data was accepted. In the Netherlands that pool is usually GS1 Data Source; in Belgium and Luxembourg it is GS1 Belgilux's My Product Manager Share.

The hard part is not the network. It is preparing data that passes the checks: a complete GTIN hierarchy from consumer unit to pallet, the right GS1 GPC brick, dimensions and weights measured to GS1 rules, and the fields your sector agreed on. The GDSN dictionary entry covers the definition. This post is the how-to, built from GS1's own manuals for Dutch and Belgian suppliers.

The five GDSN steps, seen from the supplier's desk

GS1 describes the network as interoperable data pools plus the GS1 Global Registry. The GS1 support article on how GDSN works lists five steps. Translated into supplier work, they look like this:

  1. Prepare your data to GS1 standards. Every item needs a GTIN and your company needs a GLN. It usually takes longest, because it touches your ERP, packaging and measurement routines.
  2. Upload to a source data pool. You pick one GDSN-certified pool (GS1 Data Source, My Product Manager or a commercial pool) and load your items there, by hand, by spreadsheet, through a PIM or through a machine-to-machine link.
  3. The pool registers your items. Your pool sends basic information about each item to the GS1 Global Registry, which stores that summary and the location of your pool. It does not store your full product record.
  4. Your customer subscribes. The retailer or wholesaler subscribes to your items through its own pool. The Global Registry tells that pool where your data lives.
  5. Publication and synchronization. You publish the items to that customer, and from then on every change you make flows to their pool automatically.

One GDSN publication from supplier to retailer

Loading diagram
The Global Registry only routes: your full item data travels from your pool to the retailer's pool, and the CIC is the answer you wait for.

Because the registry connects the pools, you only need one. A supplier on GS1 Data Source can publish to a retailer whose pool is in another country, as long as both pools are certified and the retailer subscribes.

CIN, CIP, CIS and CIC: the GDSN message set in plain words

Whether you type into a web interface or send XML, GDSN runs on a small set of XML messages. GS1 Nederland's manual for an automatic connection to GS1 Data Source lists them like this:

  • CIN (Catalogue Item Notification): the item data itself, for one item or a whole hierarchy. You send it to your pool; your pool forwards it to recipients.
  • CIP (Catalogue Item Publication): tells your pool which recipients may receive an item. A CIP with the DELETE command removes one publication.
  • CIS (Catalogue Item Subscription): sent by the recipient to subscribe to one or more suppliers.
  • CIC (Catalogue Item Confirmation): the recipient's or recipient pool's answer about the item it received.
  • RFCIN (Request for CIN): the recipient asks the pool to resend everything published to it.
  • CIHW (Catalogue Item Hierarchy Withdrawal): removes all publications of a hierarchy.
  • GS1 Response: the pool's technical answer to every XML message you send. Syntax or code list errors show up here; a clean message comes back as Accepted.

The order matters. You send the CIN first and wait for an Accepted response, then send the CIP. Only then does the pool send a CIN to the recipients named in the CIP, and only then can a CIC come back.

Reading CIC feedback without guessing

GS1 Nederland's manual says a CIC with content errors carries the status REVIEW plus error messages. A WARNING means the data still went to the recipient; ACTION_NEEDED means the errors must be fixed before the recipient receives anything. GS1 Belgilux shows the same feedback in My Product Manager with its own labels: Synchronized or Received is fine, Review means the data was published but a review message may stop the buyer from seeing it, and Exception means an error blocks the publication in GDSN itself. Its page on GDSN feedback adds two practical points: feedback appears at the level you published (usually the top of the hierarchy, not the base unit), and the full round trip can take between 1 and 24 hours.

Who expects suppliers in GDSN in the Netherlands and Belgium

GDSN is a retail and healthcare network first. GS1 Nederland runs GS1 Data Source with separate sector agreements for Food, Health & Beauty, DIY, Garden & Pet and Healthcare: in each sector, retailers and suppliers agreed which fields are shared. If you supply supermarkets, drugstores, DIY chains, garden centers, pet stores or hospitals in the Benelux, expect a customer to ask for your data through the pool rather than by spreadsheet.

Wholesalers sit on both sides. GS1 Nederland's step plan notes that a wholesaler can publish and receive through the same pool, and GS1 Belgilux tells distributors that their customers want data from their direct supplier, so a distributor enters product sheets too, often based on what its own suppliers published. The Dutch installation and electrical trade mostly takes a different route. 2BA describes itself as the uniform item file for technical sectors, with the installation sector as its largest, built on the ETIM classification structures that Ketenstandaard maintains. If your customers are installation wholesalers, expect them to ask for ETIM-classified data through the 2BA data pool rather than GDSN.

Signing up for GS1 Data Source as a Dutch supplier

GS1 Nederland's step plan for suppliers in DIY, garden and pet (version 6.2, August 2023) is the most concrete public walkthrough. The sign-up itself:

  1. Log in to MijnGS1, choose Bestellen (Order) and select GS1 Data Source - Data publiceren.
  2. Pick the GLN to link to the service. GS1 advises the supplier GLN you already use in EDI messages with your customers.
  3. Pay the invoice: a one-time contribution to set up the pool for your company plus an annual contribution. The rate depends on your turnover; GS1 publishes the rates in its fee overview.
  4. Have the intake call. GS1 walks you through the pool, the web interface, the Benelux data model for your sector, GS1 GPC and e-commerce fields, and data quality.

Then you choose how data gets in. The step plan lists four routes: the GS1 web interface; the web interface fed by mapping software that converts your own files to the GS1 data model and imports them; a PIM system from a solution provider that publishes to the pool; or your own machine-to-machine link. For that link the step plan names three protocols: FTPS and AS2 carry GDSN XML, and an API takes product data and media files as JSON. Over AS2, media travel as a URL in the message that the recipient fetches itself. GS1 Nederland's manual for automatic connections advises sending a test message through the test environment first.

Before a retailer goes live with you, it runs a technical and data quality test and contacts you about it. Only after that do you publish from the production environment, and GS1 advises agreeing each new recipient with that customer first.

The Belgian route through My Product Manager

In Belgium and Luxembourg, GS1 Belgilux operates its certified pool under the name My Product Manager Share. You request access, get onboarding help to enter your first products, validate the hierarchy and publish. Publication is either public (visible to all recipients subscribed to the countries where you sell) or targeted to a list of recipient GLNs. Private label products go only to the GLNs of the retailer that owns the label.

The dataset a first GDSN publication needs

Everything starts with the GTIN hierarchy. A GDSN item is not one row: it is the consumer unit, the case that holds it and the pallet, each with its own GTIN, and the hierarchy says how many of each fit in the level above. Each level carries flags for whether it is the base unit, a consumer unit, an orderable unit or a despatch unit. If your ERP item master only knows one article number per product with a pack size in a free-text field, this is where the project starts. The GTIN, UPC and EAN guide explains the identifiers, and the EAN and GTIN validator checks check digits before you load anything.

The second decision is the GPC brick. GS1's step plan is blunt about it: the brick you choose determines which data you must share. Its own example is a 25 kg bag of cement (GTIN 8712345678906) in brick 10002526, Cement. Check the brick's definition, not just its name, and agree it with your main customers, because some retailers already classified your items and expect the same brick. The GS1 GPC guide explains the segment, family, class and brick levels.

GS1 Nederland's manual for phased delivery in DIY, garden and pet (version 2.0, August 2026) lists the 30 mandatory attributes for a preliminary publication. They make a good minimum dataset for any first load, because they are the fields an order cannot be placed without:

The 30 attributes of a preliminary DIY, garden and pet publication

IdentificationData supplier GLN, data supplier name, GTIN, additional product identification and its code type, target market code6ERP, GS1 membership
Hierarchy and unit flagsHierarchy level code, base unit, consumer unit, orderable unit, despatch unit, variable measure item6ERP or logistics master
Classification and datesGPC classification code, effective date/time, start availability date/time3Product management
Names and brandBrand name, functional name, short product name, product description4Marketing or PIM
Measurements and packagingHeight, width, depth, gross weight, net weight, net content, packaging type code7Logistics, measured to GS1 rules
Tax and customsTax type code, tax category code, customs classification value and type code4Finance, customs
Showing 6 of 6 rows
Grouped by where the data usually lives: most of these fields sit in the ERP, but measurements and names often exist nowhere in usable form.

Measure products to the GS1 measurement rules rather than copying catalog dimensions, and store the unit with every value: a height of 60 is useless without knowing whether it is millimeters or centimeters. The post on unit of measure in product data covers that discipline, and code lists such as the packaging type behave like the reference data your ERP already keeps. Add images and documents last, after the fields an order depends on.

Phased delivery in DIY, garden and pet: preliminary data first

Buyers in DIY, garden and pet often order at trade fairs, before the supplier has all the data needed to deliver, store and sell the product. The phased delivery manual solves that with the attribute Code status artikelinformatie (5.131): you publish with the value preliminary, fill the 30 attributes above, and complete the rest (commercial GPC data, hazardous substances, packaging, images, safety data sheets) well before delivery, then switch the status to final and publish again.

  • Fill Eerste verzenddatum/tijd (5.066), the first ship date, whenever you use the status. Products that only ever need preliminary data, such as greeting cards, get 1 January 2050 by sector agreement.
  • Set the status only on the lowest level of the hierarchy, usually the consumer unit. Leave it empty if you do not deliver in phases.
  • Not every retailer can process preliminary data; the manual names only a few that can. The pool refuses a preliminary publication to any other recipient, and the receipt messages tab (Ontvangstberichten) then shows it in red as Rejected or Review.
  • If a preliminary product is never delivered, remove it with the end availability date rather than leaving it in the pool.

After go-live: data quality checks, releases and delisting

Publishing once is the start. GS1 Nederland's step plan ends with the routine that keeps a publication right: data that is complete, correct, up to date, consistent across systems and delivered on agreed dates, with named people who check new and changed items. Food, Health & Beauty adds a sector data quality program with checks by a Data Management Service, and GS1 Belgilux runs its own audit program for My Product Manager.

The data model changes too. For DIY, garden and pet in the Benelux, GS1 Nederland updates it four times a year and announces changes two months ahead; on the release date your data must meet the new version. The global GDSN has its own maintenance release schedule on gs1.org. If you built a machine-to-machine link, every release is a mapping change you have to test.

Ending an item is part of the process. Fill EndAvailabilityDateTime when an item will no longer be supplied: GS1 Data Source runs a script that removes the publications on that date and sets the item to discontinued. A CIHW removes all publications of a hierarchy at once.

Rules like these stop an item without a valid GTIN or main image before it leaves WISEPIM. They do not replace the data pool's own validations.

What certification means, and what GDSN costs a supplier

Certification in GDSN applies to data pools, not to suppliers. GS1 certifies pools, and the list of certified pools is public on gs1.org. A supplier is never GDSN certified; what you pass is your pool's validations, each retailer's technical and quality test, and, in some sectors, the data quality program.

Costs come in three parts. The pool fee: for GS1 Data Source a one-time setup contribution plus an annual contribution based on turnover (check GS1's current fee overview for your rate; GS1 Belgilux publishes its own rates). Your tooling: a mapping tool, a PIM connector or the internal cost of building a machine-to-machine link. And maintenance: the step plan points out that four data model releases a year mean regular changes to mappings and validations, which weighs more the more product groups you have.

Ready for a first GDSN publication

0 of 8 done0%

Preparing GDSN-ready data in a PIM that does not publish to the pool

WISEPIM has no GDSN connection: it does not send CIN messages and does not publish to GS1 Data Source or My Product Manager. What it can do is the preparation work that decides whether your first publication passes. GTIN check digits are enforced when you save a product, and the EAN lookup fills basic data from a barcode. The GS1 GPC tab in the Classification module lets you browse segments, families, classes and bricks and turn bricks into categories, so every product carries the brick you agreed with your customers.

Importing a GPC level creates its whole path as categories, with the bricks as the categories your products live in.

Quality Guard rules can keep products without weights, dimensions or a GTIN from reaching your channels, and Export Templates let you choose fields and rename column headers to match the spreadsheet your mapping partner or the pool's bulk upload expects. The GDSN step itself, loading and publishing in the pool, stays with GS1's interface or a certified provider.

Diego Nijboer

CTO and Co-Founder at WISEPIM, building AI-powered solutions that transform product data management for e-commerce businesses. Over 10 years of experience solving complex technical challenges in e-commerce and PIM systems.

Frequently asked questions

Still have questions?

Can't find the answer you're looking for? Please get in touch with our team.

Contact Support

No. GDSN is the global network of certified data pools connected by the GS1 Global Registry. GS1 Data Source is GS1 Nederland's data pool inside that network. Publishing in GS1 Data Source puts your items into GDSN, so a retailer on another certified pool can subscribe to them. In Belgium and Luxembourg the equivalent pool is GS1 Belgilux's My Product Manager Share.

In practice, yes. GDSN items are identified by GTINs and companies by GLNs, and both come from GS1 numbering. GS1's own description of the process starts with preparing internal data to GS1 standards. In the Netherlands you order GS1 Data Source through MijnGS1 and link it to one of your GLNs, ideally the one you already use for EDI.

GS1 Belgilux says the full round trip of GDSN checks and receipt by the recipient can take between 1 and 24 hours, and advises checking feedback after 24 hours. Before that, a new retailer relationship usually needs a technical and data quality test, which GS1 Nederland's step plan describes as a separate step before you publish from production.

Yes. Any GDSN-certified data pool can act as your source pool, and GS1 publishes the list of certified pools. Because pools are connected through the Global Registry, a retailer on GS1 Data Source can subscribe to items you published in another pool. Check local sector rules first: some retailers set conditions for certain product types.

It is a CIC status from the recipient side. According to GS1 Nederland's manual, a CIC with content errors has the status REVIEW and lists the errors. With WARNING, the data was still forwarded to the recipient. With ACTION_NEEDED, you must fix the errors and publish again before the recipient receives the item.

Keep exploring

Hand-picked next steps to go deeper.

Better product data, better results.Get more sales.

4.7