Skip to main content

Product Data Pools in Wholesale: 2BA, ARGE, Open Datapool, GDSN

Which data pool your wholesale customers read from, by trade and country: 2BA, ARGE Neue Medien, Open Datacheck, Open Datapool and GS1 GDSN compared.

Diego Nijboer

Product Data Pools in Wholesale: 2BA, ARGE, Open Datapool, GDSN

A product data pool is a shared database where manufacturers publish their article data once, checked against the trade's own data guideline, and where wholesalers, installers and their software pick it up. In the technical trades the pools are run by trade associations or companies they own. In consumer goods, food and healthcare the job falls to the GS1 Global Data Synchronisation Network (GDSN) and its certified data pools.

Which pool you deliver to depends on your trade and your customers' country. Dutch installation wholesalers read from 2BA. In German plumbing, heating and air conditioning (SHK), manufacturers deal with ARGE Neue Medien's building-masterdata.com, the wholesale association's Open Datacheck SHK and the contractors' Open Datapool. German electrical wholesalers take manufacturer data through VEG's Open Datacheck Elektro. Grocery, DIY and healthcare buyers expect GDSN. None of them replaces your own master record; each one is another output of it.

Six data pools a technical manufacturer runs into

The pools differ in who runs them, who feeds them and which file they want. This overview is limited to what each pool states on its own site.

Product data pools by trade and country

[2BA](https://www.2ba.nl/over-2ba/wat-biedt-2ba/voor-de-fabrikant/informatie-fabrikant)Netherlands, installation trade2BA, owned by Techniek Nederland, ETIC, DGC, ECEG (ETG), TGF and FEDETManufacturers, importers and agents; wholesalers add trade dataInstallers, wholesalers and their softwareETIM xChange 2.0, BMEcat 2005 (ETIM guideline 4.0 and 5.0), DICO SALES005, INSBOU004, PAB 2; ETIM 10 as base version
building-masterdata.comGermany, plus downloads for 16 countries; building servicesARGE Neue Medien e.V., PaderbornARGE member manufacturersTrade, contractors, planners and architects, free of chargeDQR in Germany, Building Masterdata Guideline (BMDG) for other countries
Open Datacheck SHKGermany, SHKDG Haustechnik (SHK wholesale association)SHK manufacturersDG Haustechnik member wholesalers and Open DatapoolDG Haustechnik interface recommendation for DQR 11.0
[Open Datapool](https://www.open-datapool.de/open-datapool/)Germany, SHK tradeZVSHK (SHK trade association)Manufacturers, directly or through Open Datacheck SHKSHK contractors through their guild accessData checked against current SHK standards
[Open Datacheck Elektro](https://itek-branchenwissen.atlassian.net/wiki/spaces/DKB/pages/1967489029/Open+Datacheck+-+Elektro+english)Germany, electricalVEG (electrical wholesale association)Electrical manufacturersVEG member wholesalersETIM BMEcat (VEG data structure for BMEcat ETIM 5.0) and ETIM xChange
[GS1 GDSN pools](https://www.gs1.org/services/gdsn/certified-data-pools-list)Worldwide; GS1 Data Source in the NetherlandsGS1 and certified data poolsManufacturers and wholesalersRetailers, wholesalers and healthcareGDSN, with data agreed per sector
Showing 6 of 6 rows
The technical pools are run by trade associations and each has its own guideline; GDSN is one network with many certified pools.

2BA: one manufacturer record, many wholesalers' trade data

According to 2BA, it has run the neutral data pool for the Dutch installation chain since 2004, based on the international ETIM standards. Manufacturers, importers and agents deliver their product data, 2BA checks and classifies it, and each wholesaler then links its own trade information to that unique manufacturer product. On the installer side that trade information covers prices, packaging units and logistic data such as packaging type, weight and dimensions. Installers load the result into their own software through a selection profile, or search the pool from inside their software with 2BA's Unifeed search engine. What a supplier has to deliver, field by field, is covered in the 2BA product data guide.

The ownership explains why most of the chain uses it. 2BA's shareholders are installers (through Techniek Nederland and the buying groups ETIC and DGC), wholesalers (through ECEG for electrical and TGF for mechanical and sanitary wholesale, which 2BA says together represent more than 90% of installation wholesale) and manufacturers (through FEDET).

2BA's supplier step plan follows the same order a data team would: agree the communication standard, then deliver trade information, product information, ETIM product classes, ETIM feature values and finally ETIM MC (modelling class) values. Files go in through SFTP, an API or the website.

Two details decide whether a first upload passes. On ETIM, 2BA says it follows ETIM Dynamic daily and uses as its base version the most recent static release ETIM International has published: ETIM 10 at the time of writing. A new static release comes out every two years, usually at the end of the year, and ETIM International's release plan schedules ETIM 11.0 for December 2026, so check which base version applies when you deliver. On format, 2BA's ETIM xChange 2.0 documentation lists the frequent errors: wrong headers, empty optional arrays, missing mandatory arrays and not following the order of the schema. It also notes that xChange 2.0 cannot carry physical files, so attachments must be URLs. The ETIM classification walkthrough covers assigning classes, features and values to a supplier catalog.

The ETIM choice also shows on the receiving side. A data customer can download 2BA data classified to the current base version, to ETIM Dynamic, or to ETIM Dynamic including expired classifications. So the release you classified against decides which of those downloads your products appear in correctly, and it is worth agreeing with 2BA before the first upload.

German SHK: one guideline, three platforms

The German SHK trade agreed its data rules before it agreed its platforms. The Datenqualitätsrichtlinie (DQR) is maintained jointly by ARGE Neue Medien, the software association BVBS, the wholesale association DG Haustechnik and the trade association ZVSHK. ARGE reports that DQR 11.0 took effect on 1 April 2026, with new fields, new regulatory attributes for EPREL, the EU deforestation regulation and the EU Data Act, and wider media format support.

Three platforms then distribute data that follows the DQR, and a manufacturer can reach both wholesale and contractors from one delivery:

  • building-masterdata.com is the platform of ARGE Neue Medien, the association of building services manufacturers founded in 1988 with 117 industry members, according to ARGE. Member manufacturers publish articles, images, planning data and documents there, and trade partners download them free of charge. For other countries, ARGE's Building Masterdata Guideline (BMDG) sets country-specific requirements.
  • Open Datacheck SHK is DG Haustechnik's platform where manufacturers check, optimize and pass their product data to DG Haustechnik's member wholesalers. Per DG Haustechnik's knowledge base, it also feeds Open Datapool and through it the contractors.
  • Open Datapool is ZVSHK's portal for contractors, who reach it through the access their guild provides and pick the manufacturers they need. Membership of the association makes it free for them. Manufacturers that are not listed contact ZVSHK, and according to Open Datapool a premium partnership with bathroom planning data, PDF catalogs and a link to the manufacturer's own ordering portal costs EUR 2,000 a year.

One manufacturer record feeding German SHK pools and 2BA

Loading diagram
Open Datacheck SHK feeds both DG Haustechnik wholesalers and Open Datapool, so one SHK delivery reaches wholesale and contractors.

The DG Haustechnik interface recommendation for DQR 11.0 shows how concrete these rules are. Every file is UTF-8 and needs a header row; GTINs have 13 or 14 digits with a valid check digit; dates are written DDMMYYYY. Content is graded in five quality categories:

  1. Technically required, such as the article number, plus details that become required once you start a content block (a price needs price type, currency, price basis and unit).
  2. Mandatory quality criterion, not needed by the parser but required by the guideline, such as an image for every standard article.
  3. Conditionally mandatory, triggered by a product property: a dangerous good needs the UN number, hazard class and transport category.
  4. Supplementary, such as accessory lists, which serve the customer.
  5. Optional, such as URLs to further information or installation and maintenance manuals.

The same recommendation lists what changed for DQR 11.0: optional "not orderable before", "not deliverable before" and "no marketing before" dates, the EPREL registration number, marking for the deforestation regulation and the Data Act, and a rule that deleted articles may not be reactivated. Contractor software in this trade still often imports DATANORM next to the richer DQR data.

German electrical wholesale and Open Datacheck Elektro

In the German electrical trade, VEG, the wholesale association, runs Open Datacheck Elektro, where electrical manufacturers check and optimize their product data and pass it to VEG's member wholesalers. The knowledge base documents two delivery formats: ETIM BMEcat, following a VEG data structure for BMEcat ETIM 5.0, and ETIM xChange. It also documents processes for discontinuing and deleting items and for changing item numbers.

GS1 GDSN pools for food, DIY and healthcare ranges

Outside the technical trades, product data travels through GDSN. A company subscribes to a certified data pool, sets up its product content there and synchronizes it with all its trading partners. GS1 lists more than 40 certified data pools, among them GS1 Data Source of GS1 Netherlands (powered by GS1 Denmark), My Product Manager of GS1 Belgilux and several pools based in Germany.

In the Netherlands, according to GS1 Netherlands, GS1 Data Source serves manufacturers, wholesalers and suppliers, and the data each sector shares is agreed per sector: food and drugstore, DIY, garden and pet, and healthcare. A manufacturer of installation products that also sells through DIY chains can end up delivering to 2BA and to a GDSN pool for the same article. The GDSN walkthrough covers how publishing to a pool works step by step.

Healthcare shows how far a pool's data travels once it is in. GS1 Netherlands states that healthcare institutions, the Dutch national implant register (Landelijk Implantaten Register) and databases all work with data from GS1 Data Source. An error in a GTIN or a measurement there does not stay in one webshop; it ends up in every system that subscribes.

Where the pools overlap and where they disagree

Most of what the pools ask for is the same item master data in a different wrapper. The core overlaps:

  • Identification: GTIN with a valid check digit, manufacturer article number, brand.
  • Classification: an ETIM class with feature values and units in the technical pools; sector data models in GDSN.
  • Units and packaging: order unit, packaging levels, weight and dimensions. A price read against the wrong unit is wrong for every customer at once.
  • Media and documents: images and manuals, increasingly as URLs rather than files.
  • Lifecycle: discontinuation dates, successors and article number changes.

The disagreements are smaller but decide whether a file passes:

  • ETIM release. 2BA works from its base version (the latest static release, ETIM 10 at the time of writing) and ETIM Dynamic; the DG Haustechnik recommendation for DQR 11.0 lists ETIM 11 and drops ETIM 8. Keep the release you classified against with every delivery.
  • File format. ETIM xChange or BMEcat for 2BA and Open Datacheck Elektro, DG Haustechnik's own file structure for Open Datacheck SHK, GDSN messages through your data pool.
  • Who sends the price. In 2BA the wholesaler adds its trade information to your product. In the German SHK chain the manufacturer delivers a factory list price, and the DQR 11.0 recommendation describes how raw material surcharges are expressed in it.
  • Deletions. DQR 11.0 forbids reactivating deleted articles, so a deletion sent by mistake cannot simply be undone with the next file.
Unit sets with symbols and conversion factors can be loaded from a CSV file, so every pool export reads units from the same list.

Delivering once to several pools

"Deliver once" works when the master record is complete enough for the strictest pool, and each pool gets its own mapping and its own validation. An illustrative case: a Dutch manufacturer of radiator valves sells to Dutch installers and to German SHK wholesalers. From one record it publishes to 2BA (ETIM xChange 2.0, classified to ETIM 10) and to Open Datacheck SHK (DG Haustechnik files under DQR 11.0, UTF-8 with a header row), which also puts the articles in front of contractors through Open Datapool. If a German wholesaler's contractors still ask for DATANORM, that file is a third output, built from the same article numbers and prices. In practice the work runs in this order:

Before the first upload to a second data pool

0 of 7 done0%

A sensible order of pools follows revenue: the pool your largest wholesalers read from first, the others mapped from the same record afterwards. PIM for plumbing and HVAC covers what the installation trade needs from that record.

Preparing pool deliveries from one WISEPIM record

WISEPIM has no connection to 2BA, ARGE Neue Medien, Open Datacheck, Open Datapool or any GDSN data pool, and it does not produce ETIM xChange or DG Haustechnik files. Uploads still go through each pool's own channel. Where WISEPIM fits is the master record those uploads come from. Product classification assigns ETIM 10.0 classes per product family (2BA's base version at the time of writing), a mapping review proposes links from your own attributes to ETIM features for a person to approve, and an ETIM conformance score shows how many class features are valid.

Checks run before export. GTIN check digits are enforced on save, and Quality Guard rules can stop products with a missing EAN or image from reaching channels. For pools and wholesalers that take BMEcat, WISEPIM exports BMEcat 2005 with ETIM features; products whose family has no ETIM class are left out of that file. CSV and Excel exports cover recipients that work from spreadsheets. Whether a given pool accepts a file is something to test with that pool's own checker first.

Rules like "EAN / GTIN required" are set to block, warn or skip, so incomplete articles are caught before they go out.
Diego Nijboer

CTO and Co-Founder at WISEPIM, building AI-powered solutions that transform product data management for e-commerce businesses. Over 10 years of experience solving complex technical challenges in e-commerce and PIM systems.

Frequently asked questions

Still have questions?

Can't find the answer you're looking for? Please get in touch with our team.

Contact Support

2BA is the Dutch product data pool for the installation trade, running since 2004 and based on ETIM. Manufacturers, importers and agents deliver product data, 2BA checks and classifies it, and wholesalers link their own prices, packaging units and logistic data to each product. Installers load the data into their software. Its shareholders represent installers, wholesalers and manufacturers.

Open Datacheck SHK is the wholesale association DG Haustechnik's platform, where SHK manufacturers check and optimize their data and pass it to member wholesalers. Open Datapool is the trade association ZVSHK's portal where SHK contractors pick manufacturers and download their data. Open Datacheck SHK also feeds Open Datapool, so one delivery reaches both.

Only if it sells through channels that work with GDSN. 2BA covers the Dutch installation chain. GDSN pools such as GS1 Data Source serve sectors like food and drugstore, DIY, garden and pet, and healthcare. A manufacturer whose products also sell in DIY chains can need both for the same article.

Ask the pool. 2BA uses the most recent static ETIM release as its base version (ETIM 10 at the time of writing) and also follows ETIM Dynamic, which adds approved changes daily. ETIM International plans ETIM 11.0 for December 2026, and the DG Haustechnik recommendation for DQR 11.0 lists ETIM 11 and drops ETIM 8. Record which release you classified against and send that information with every delivery.

ARGE Neue Medien is a non-profit association of building services manufacturers, founded in 1988 and based in Paderborn, with 117 industry members. It manages product data quality for its members, helps develop the SHK data quality guideline (DQR) and runs building-masterdata.com, where trade partners download member data free of charge.

Keep exploring

Hand-picked next steps to go deeper.

Better product data, better results.Get more sales.

4.7